思科网络设备互联第一部分ICND1考试大纲
来源:才华咖 本文已影响2W人
来源:才华咖 本文已影响2W人
思科网络设备互联第一部分(101-105 ICND1)考试时间为90分钟,有45-55道CCENT和CCNA路由和交换认证相关的考题。通过101-105 ICND1考试是获得其他入门级认证的第一步。100-105 ICND1考试检验考生是否具备网络基础,LAN 交换技术,路由技术,网络基础设施服务及网络基础设施管理的相关技能。
1.0 Network Fundamentals
1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
1.3.a Firewalls
1.3.b Access points
1.3.c Wireless controllers
1.4 Compare and contrast collapsed core and three-tier architectures
1.5 Compare and contrast network topologies
1.5.a Star
1.5.b Mesh
1.5.c Hybrid
1.6 Select the appropriate cabling type based on implementation requirements
1.7 Apply troubleshooting methodologies to resolve problems
1.7.a Perform fault isolation and document
1.7.b Resolve or escalate
1.7.c Verify and monitor resolution
1.8 Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.9 Compare and contrast IPv4 address types
1.9.a Unicast
1.9.b Broadcast
1.9.c Multicast
1.10 Describe the need for private IPv4 addressing
1.11 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.12 Configure, verify, and troubleshoot IPv6 addressing
1.13 Configure and verify IPv6 Stateless Address Auto Configuration
1.14 Compare and contrast IPv6 address types
1.14.a Global unicast
1.14.b Unique local
1.14.c Link local
1.14.d Multicast
1.14.e Modified EUI 64
1.14.f Autoconfiguration
1.14.g Anycast
2.0 LAN Switching Technologies
2.1 Describe and verify switching concepts
2.1.a MAC learning and aging
2.1.b Frame switching
2.1.c Frame flooding
2.1.d MAC address table
2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4 Configure, verify, and troubleshoot VLANs (normal range) spanning multiple switches
2.4.a Access ports (data and voice)
2.4.b Default VLAN
2.5 Configure, verify, and troubleshoot interswitch connectivity
2.5.a Trunk ports
2.5.b 802.1Q
2.5.c Native VLAN
2.6 Configure and verify Layer 2 protocols
2.6.a Cisco Discovery Protocol
2.6.b LLDP
2.7 Configure, verify, and troubleshoot port security
2.7.a Static
2.7.b Dynamic
2.7.c Sticky
2.7.d Max MAC addresses
2.7.e Violation actions
2.7.f Err-disable recovery
3.0 Routing Technologies
3.1 Describe the routing concepts
3.1.a Packet handling along the path through a network
3.1.b Forwarding decision based on route lookup
3.1.c Frame rewrite
3.2 Interpret the components of routing table
3.2.a Prefix
3.2.b Network mask
3.2.c Next hop
3.2.d Routing protocol code
3.2.e Administrative distance
3.2.f Metric
3.2.g Gateway of last resort
3.3 Describe how a routing table is populated by different routing information sources
3.3.a Admin distance
3.4 Configure, verify, and troubleshoot inter-VLAN routing
3.4.a Router on a stick
3.5 Compare and contrast static routing and dynamic routing
3.6 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
3.6.a Default route
3.6.b Network route
3.6.c Host route
3.6.d Floating static
3.7 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
4.0 Infrastructure Services
4.1 Describe DNS lookup operation
4.2 Troubleshoot client connectivity issues involving DNS
4.3 Configure and verify DHCP on a router (excluding static reservations)
4.3.a Server
4.3.b Relay
4.3.c Client
4.3.d TFTP, DNS, and gateway options
4.4 Troubleshoot client- and router-based DHCP connectivity issues
4.5 Configure and verify NTP operating in client/server mode
4.6 Configure, verify, and troubleshoot IPv4 standard numbered and named access list for routed interfaces
4.7 Configure, verify, and troubleshoot inside source NAT
4.7.a Static
4.7.b Pool
4.7.c PAT
5.0 Infrastructure Management
5.1 Configure and verify device-monitoring using syslog
5.2 Configure and verify device management
5.2.a Backup and restore device configuration
5.2.b Using Cisco Discovery Protocol and LLDP for device discovery
5.2.c Licensing
5.2.d Logging
5.2.e Timezone
5.2.f Loopback
5.3 Configure and verify initial device configuration
5.4 Configure, verify, and troubleshoot basic device hardening
5.4.a Local authentication
5.4.b Secure password
5.4.c Access to device
5.4.c. [i] Source address
5.4.c. [ii] Telnet/SSH
5.4.d Login banner
5.5 Perform device maintenance
5.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
5.5.b Password recovery and configuration register
5.5.c File system management
5.6 Use Cisco IOS tools to troubleshoot and resolve problems
5.6.a Ping and traceroute with extended option
5.6.b Terminal monitor
5.6.c Log events
实施思科IOS网络安全考试(IINS)
Adobe InDesign CS3考试大纲
Adobe InDesign CS6认证考试大纲
实施思科统一无线语音网络IUWVN考试要点
思科认证网络工程师CCNA安全认证考试大纲
Adobe InDesign CS4考试大纲
WIFUND实施思科无线网络基础考试要点
实施思科IP交换网络考试大纲
2017网络工程师考试知识点:网络互联技术
浅析管理Cisco互联网络
实施思科统一无线网络基础考试(IUWNE)
思科认证网络设计工程师CCDA认证考试要点
思科认证互联网专家无线认证实验考试大纲
思科认证实施Cisco IP交换网络考试
实施思科IP交换网络(SWITCH 642-813)考试要点
2015年计算机三级《网络技术》考试重点:WindowsNT
discriminating是什么意思
如何用Windows通过网络安装RedHat Linux
思科CCNP培训:网络管理实战技巧经验
2016年微软认证:Windows连接互联网防病毒基本原则
二年级英语第四册Consolidation教学设计
对互联网+税务的思考
ADOBE认证科目考试试题及答案「InDesign」
计算机职称考试Internet 应用Windows xp版考试大纲
思科网络设备互联第一部分ICND1考试大纲
思科认证CCIE路由和交换实验考试大纲
网络互联技术论文
一年级英语Unit 9《Food and drink》的教案设计
以互联网思维来看待互联网发展
ARCH思科网络服务架构设计考试主要内容
美国CPA高分考生Annie Delaney考试经验分享
大学生互联网络求职方法
故障排除思科无线企业网络考试大纲
思科CCNA认证网络工程师学习指南
拉夫堡大学互联网计算机与网络安全理科硕士专业简介
思科认证200-105 ICND2 v3.0考试要点
思科资深网络工程师(CCNP)认证介绍
华为HCIE-Transmission认证考试大纲
HCNP-Big Data-Developer V1.0考试大纲
华为认证HCNA-Cloud-BCCP考试大纲